The Hydrotec 8000 total fat solution, consisting of an extraction unit, a hydrolysis unit and a FOSS Hydrocap single filter system, allows you to perform total fat analysis in one integrated procedure.
Unique patented filter system
The unique, patented Hydrocap filter avoids sample transfer and reduces the risk of human error. Laboratory costs are dramatically reduced and higher sample throughput improves cost effectiveness.
Improving throughput at a lower cost
Simplified operation reduces the potential for human error in total fat analysis while reducing costs and improving overall sample through-put.
Reducing risk in total fat analysis
Chemicals are added and removed by pump, improving safety and reducing the risk of error.
For total fat analysis, Hydrotec 8000 can be used together with a Soxtec 8000 or ST255 Soxtec extraction unit and FOSS HydroCap single filter that works across both units.
Sample type
Raw materials, intermediates and finished products in food, animal feed and pet food
Parameters
Total fat
Technology
Fully automated acid hydrolysis
Approvals
ISO 1444:1996 meat and meat products ISO 11085:2008 cereals, cereals-based prod-ucts and animal feeding stuffs
ISO 6492:1999 animal feeding stuff
| Performance data | |
| Performance data | 0.5-2 g |
| Measurement range | 0.1-100% fat in combination with extraction |
| Repeatability | Typically ±1% relative standard deviation for 10-100% fat content in combination with extraction |
| Capacity per batch | 12 samples simultaneously |
| Hydrolysis time | Typically 2 hours, or as stated in Application |
| Modes | 2 modes; Automatic/Manual |
| Programs | 1-9 |
| Installation requirements | |
| Power supply | 115 V 50/60 Hz or 230 V 50/60 Hz depending on ordered |
| Water supply | Version Two water taps - for cooling and also for rinsing water.Alternatively one tap equipped with a T-connector. Deionized or distilled water is not needed |
| Cooling and rinsing water | Water tap: 1litre/min, <25 °C (pressure 50 to 500 kPa or 0.5 to 5 bar).
Circulating Water Cooler: 1 litre/min, <25 °C (max backpressure 20 kPa or 0.2 bar) |
| Scurgere | One drain/sink for rinse, acid and cooling water |
| Ventilation | Fume hood |
| Dimensions (w x d x h) cm | 43 x 34 x 31 cm.Height with lid open is 60 cm |
| Weight | 18 kg |
| Power consumption | 1860 W (230 V) 1660 W (115 V) |
| Transient overvoltage | Category II |
Accessories
- Hydrocaps
- Filter stand
