The FT 122 Fibertec Hot Extraction Unit, for hot hydrolysis and ex-traction with built-in systems for heating and filtration, performs fibre analysis according to Weende, van Soest and other recognised methods, using externally preheated reagents.
Reliable fibre analysis
Batch handling tools improve operator safety when handling hot crucibles, processing up to 6 samples at a time. Single or sequential ex-tractions including boiling, rinsing and filtration are performed under reproducible and controlled conditions for reliable fibre analysis.
Easy sample handling
Filter crucibles are used as an integral part of the assembly during extraction, rinsing and filtration to prevent sample transfer. More versatility and reduced operational cost is achieved with crucibles that are also used as sample vessels during weighing, drying and ashing.
Simple laboratory operations
Integral extraction and filtration is made easy with the optional FT 121 Fibertec Cold Extraction Unit for solvent dehydration, lignin determination and defatting.
Sample type
Raw materials and finished products in feed and agriculture
Parameters
Crude Fibre (CF), Neutral Detergent Fibre (NDF), amylase treated Neutral Detergent Fibre (aNDF), Acid Detergent Fibre (ADF), and Acid Detergent Lignin (ADL)
Technology
6 position single or sequential extraction including boiling, rinsing and filtration
Official reference method
ISO 6865 & 92/89 EEC Crude fibre in feed
ISO 16472 aNDF in animal feed
AOAC 2002.04 aNDF in feed
ISO 13906 ADF and ADL in animal feed
| Performance data | |
| Sample size | 0.5 - 3 g |
| Measuring range | 0.1% - 100% |
| Capacity per batch | Up to 6 samples simultaneously |
| Capacity per day | Up to 36 analyses (crude fibre method) |
| Repeatability | ±1 % relative at 5% - 30% fibre level |
| Installation requirements | |||||
| Equipment | Power supply |
Power consumption | Dimensions w × d × h cm |
Weight | Water supply |
| FT 122 Fibertec Hot Extraction Unit | 200 - 240 V, 50-60 Hz | 1.000 W | 56×38×57 | 28kg | Tap water for condensors (approximately 2 L/min) and water aspirator (during filtration) |
| FT 121 Fibertec Cold Extraction Unit with water aspirator | - | - | 56×38×28 | 14 kg | Tap water 2 L/min |
Note: Cold Extraction Unit must be placed in the fumehood with at least 0,5 m/sec airflow.
System description:
FT 122 Fibertec, (200-230V):
Hot Extraction Unit comprising: Hot extractor, reflector, reagent bottles, hot water sprayer, beaker, funnel, water suction pump, antifoaming agent, tubing, holder for 6 cru-cibles, stand for 6 crucibles, crucibles (P2 standard, 2 sets of 6), manual.
FT 121 Fibertec:
Cold Extraction Unit comprising: Cold extractor, spray bottle, tubing, T-tube.
Optional accessories:
Crucibles, P0 (porosity 160 - 250 µm), set of 6
Crucibles, P1 (porosity 100 - 160 µm), set of 6
Crucibles, P2 standard (porosity 40 - 100 µm), set of 6
Crucibles, P2 US (porosity 40 - 60 µm), set of 6
Crucibles, P3 (porosity 16 - 40 µm), set of 6
